Imer portable vibrating set, ideal for vibrating concrete to obtain a homogeneous and most compact material with a minimum of air and void, completely filling the formwork for a better finish. Perfect for pillars, slabs, low walls…
Imer portable vibrating set, ideal for vibrating concrete to obtain a homogeneous and most compact material with a minimum of air and void, completely filling the formwork for a better finish. Perfect for pillars, slabs, low walls…
220 V single-phase motor with a power of 2300 W with high-strength casing. It drives all AVPI/SQ needles. For any delivery to Corsica , contact us for a quote.
€320,00 HT (€0,00 TTC)
Perfect for vibrating concrete, this IMER AVPI / SQ needle allows better filling of formwork, better finishing of works. Ø 38 mm length 3 M. Very robust vibrating needle with reinforced transmission, flexible reinforced with steel mesh, 4 sealed bearings for greater reliability. Centrifugal force 200 kg, max output 15 m3/h, max vibration 12000 rpm, bottle length 370 mm, Ø 38 mm. Fits on MVPI / SQ engine. For any delivery to Corsica , contact us for a quote.
€230,00 HT (€0,00 TTC)
Batterie de chantier IMER 5000 W : l'énergie autonome de vos chantiers La batterie de chantier IMER 5000 W est une station d'énergie portable conçue pour alimenter vos outils électroportatifs sans groupe électrogène ni raccordement au réseau. Avec ses 5040 Wh de capacité et sa technologie LiFePO4, elle couvre une journée complète de chantier (perceuse, scie circulaire, ponceuse, projecteur, bétonnière électrique) en silence et sans la moindre émission. Pourquoi choisir la batterie 5000 W ? 5000 W de puissance continue (7000 W en pic) : de quoi faire tourner des outils exigeants. 5040 Wh d'autonomie : une journée de travail pour une équipe. Silence total : utilisable en intérieur, en rénovation, en zone résidentielle. Zéro émission : compatible espaces confinés et tunnels, là où le thermique est proscrit. Recharge en 2h30 sur secteur, et compatible recharge solaire pour les sites isolés. Écran LCD + pilotage par application : suivez la charge et la consommation en temps réel. Protections intégrées : surcharge, différentiel, BMS. Caractéristiques techniques Puissance continue 5000 W Puissance de pointe 7000 W Capacité 5040 Wh Technologie LiFePO4 avec régulation Inverter Sorties 230 V + USB Temps de recharge 2h30 (compatible solaire) Protections Surcharge, différentiel, BMS, écran LCD + application Référence 2VE5000 Batterie de chantier ou groupe électrogène ? Contrairement au groupe électrogène thermique, la batterie de chantier IMER ne produit aucun bruit, aucune fumée et ne consomme pas d'essence. Elle est immédiatement opérationnelle et sans entretien moteur. Pour les chantiers urbains, en intérieur ou soumis à des contraintes sonores, c'est la solution d'alimentation de référence. Besoin d'un modèle plus compact ? Découvrez la batterie de chantier IMER 3600 W Challenger, ou comparez les deux modèles sur notre page batteries de chantier. Tarif professionnel selon vos volumes. Demandez votre devis ou appelez notre équipe technique au 04 71 08 42 11.
€2.960,00 HT (€0,00 TTC)
The Imer EPVI/SQ portable set includes a needle + the motor, ideal for vibrating all masonry formwork, pillars, slabs, low walls, swimming pools, very handy and light, it is very popular with masons. Needle Ø 58 mm, length 4 meters. MVPI/SQ single-phase motor with a power of 2300 W (2.9 hp) with double insulation, very robust plastic casing. Very robust vibrating needle with reinforced transmission, flexible reinforced with steel mesh, 4 sealed bearings for greater reliability. Centrifugal force 310 kg, max output 35 m3/h, max vibration 11000 rpm, bottle length 450 mm, Ø 58 mm. For any delivery to Corsica , contact us for a quote.
€577,00 HT (€0,00 TTC)
The Imer EPVI/SQ portable set includes a needle + the motor, ideal for vibrating all masonry formwork, pillars, slabs, low walls, swimming pools, very handy and light, it is very popular with masons. Needle Ø 58 mm, length 3 meters. MVPI/SQ single-phase motor with a power of 2300 W (2.9 hp) with double insulation, very robust plastic casing. Very robust vibrating needle with reinforced transmission, flexible reinforced with steel mesh, 4 sealed bearings for greater reliability. Centrifugal force 310 kg, max output 35 m3/h, max vibration 11000 rpm, bottle length 450 mm, Ø 58 mm. For any delivery to Corsica , contact us for a quote.
€567,00 HT (€0,00 TTC)
The Imer EPVI/SQ portable set includes a needle + the motor, ideal for vibrating all masonry formwork, pillars, slabs, low walls, swimming pools, very handy and light, it is very popular with masons. Needle Ø 58 mm, length 2 meters. MVPI/SQ single-phase motor with a power of 2300 W (2.9 hp) with double insulation, very robust plastic casing. Very robust vibrating needle with reinforced transmission, flexible reinforced with steel mesh, 4 sealed bearings for greater reliability. Centrifugal force 310 kg, max output 35 m3/h, max vibration 11000 rpm, bottle length 450 mm, Ø 58 mm. For any delivery to Corsica , contact us for a quote.
€555,00 HT (€0,00 TTC)
The Imer EPVI/SQ portable set includes a needle + the motor, ideal for vibrating all masonry formwork, pillars, slabs, low walls, swimming pools, very handy and light, it is very popular with masons. Needle Ø 58 mm, length 1.5 meters. MVPI/SQ single-phase motor with a power of 2300 W (2.9 hp) with double insulation, very robust plastic casing. Very robust vibrating needle with reinforced transmission, flexible reinforced with steel mesh, 4 sealed bearings for greater reliability. Centrifugal force 310 kg, max. output 35 m3/h, max. vibration 11000 rpm, bottle length 450 mm, Ø 58 mm. For any delivery to Corsica , contact us for a quote.
€549,00 HT (€0,00 TTC)
The Imer EPVI/SQ portable set includes a needle + the motor, ideal for vibrating all masonry formwork, pillars, slabs, low walls, swimming pools, very handy and light, it is very popular with masons. Needle Ø 58 mm, length 1 meter. MVPI/SQ single-phase motor with a power of 2300 W (2.9 hp) with double insulation, very robust plastic casing. Very robust vibrating needle with reinforced transmission, flexible reinforced with steel mesh, 4 sealed bearings for greater reliability. Centrifugal force 310 kg, max output 35 m3/h, max vibration 11000 rpm, bottle length 450 mm, Ø 58 mm. For any delivery to Corsica , contact us for a quote.
€548,00 HT (€0,00 TTC)
The Imer EPVI/SQ portable set includes a needle + the motor, ideal for vibrating all masonry formwork, pillars, slabs, low walls, swimming pools, very handy and light, it is very popular with masons. Needle Ø 48 mm, length 4 meters. MVPI/SQ single-phase motor with a power of 2300 W (2.9 hp) with double insulation, very robust plastic casing. Very robust vibrating needle with reinforced transmission, flexible reinforced with steel mesh, 4 sealed bearings for greater reliability. Centrifugal force 275 kg, max output 25 m3/h, max vibration 11500 rpm, bottle length 390 mm, Ø 48 mm. For any delivery to Corsica , contact us for a quote.
€544,00 HT (€0,00 TTC)
The Imer EVPI/SQ portable set includes a needle + the motor, ideal for vibrating all masonry formwork, pillars, slabs, low walls, swimming pools, very handy and light, it is very popular with masons. Needle Ø 48 mm, length 3 meters. MVPI/SQ single-phase motor with a power of 2300 W (2.9 hp) with double insulation, very robust plastic casing. Very robust vibrating needle with reinforced transmission, flexible reinforced with steel mesh, 4 sealed bearings for greater reliability. Centrifugal force 275 kg, max output 25 m3/h, max vibration 11500 rpm, bottle length 390 mm, Ø 48 mm. For any delivery to Corsica , contact us for a quote.
€533,00 HT (€0,00 TTC)
The Imer EVPI/SQ portable set includes a needle + the motor, ideal for vibrating all masonry formwork, pillars, slabs, low walls, swimming pools, very handy and light, it is very popular with masons. Needle Ø 48 mm, length 2 meters. MVPI/SQ single-phase motor with a power of 2300 W (2.9 hp) with double insulation, very robust plastic casing. Very robust vibrating needle with reinforced transmission, flexible reinforced with steel mesh, 4 sealed bearings for greater reliability. Centrifugal force 275 kg, max output 25 m3/h, max vibration 11500 rpm, bottle length 390 mm, Ø 48 mm. For any delivery to Corsica , contact us for a quote.
€522,00 HT (€0,00 TTC)
The Imer EVPI/SQ portable set includes a needle + the motor, ideal for vibrating all masonry formwork, pillars, slabs, low walls, swimming pools, very handy and light, it is very popular with masons. Needle Ø 48 mm, length 1.5 meters. MVPI/SQ single-phase motor with a power of 2300 W (2.9 hp) with double insulation, very robust plastic casing. Very robust vibrating needle with reinforced transmission, flexible reinforced with steel mesh, 4 sealed bearings for greater reliability. Centrifugal force 275 kg, max output 25 m3/h, max vibration 11500 rpm, bottle length 390 mm, Ø 48 mm. For any delivery to Corsica , contact us for a quote.
€511,00 HT (€0,00 TTC)