Tools of the mason, the carpenter.

Soudal Soudafoam Universal M (Manual) expanding foam is a single-component, self-expanding polyurethane foam for upside-down use. The foam contains gases (HCFC and CFC free), which do not attack the ozone layer. 750 ml can. Excellent adhesion to all substrates, except PE/PP/PTFE. High filling yield. Very good thermal and acoustic insulation. Shake the aerosol vigorously for 20 seconds. Screw the nozzle onto the aerosol. Moisten the dust- and grease-free substrate. For unusual substrates, it is advisable to carry out an adhesion test. Fill the joint or cavity 1/3 full, as the foam continues to expand while it hardens. Shake regularly during use. If several coats are applied, moisten between coats. Uncured foam can be removed with cleaner or acetone. Cured foam can only be removed mechanically, or with the help of Soudal PU-remover.

Read more less

This Taliaplast bucket is ideal for masonry and gardening work, very resistant thanks to its reinforced walls and very solid ribbed base, it can contain cement, mortar, sand, earth, stone, rubble, etc. It has a solid Ø 6.3 mm handle with a grip for added comfort and side stops to keep the handle in a vertical position.

Read more less

Taliaplast trowel, essential in masonry, it is used to take cement or to trowel, flatten, smooth concrete. Good resistance, Honeycomb tray. Intended for professionals, Dimensions 42x28 cm.

Read more less

With this Revex mason's chisel you can, for example, carve the facings of a stone. This chisel is made of chrome-plated steel and has undergone heat treatment to guarantee a longer service life. Length 300 mm, section 16, cutting edge 20 mm, weight 490g.

Read more less

The Revex mason's pin , also called a pointer, is used to dress a facing in stone for example. This mason's pin has a resharpenable end to keep it as sharp as the first time. Its length is 300 mm and its width is 16 mm.

Read more less

Very handy, this Revex cat's tongue trowel is perfectly suited for the most delicate finishes. The laminated blade of this model will allow you to achieve very high quality smoothing. Wooden handle, length 160 mm.

Read more less

The Revex trowel is equipped with a flexible blade made of hardened steel (thinned by grinding). Forged leg, brass ferrule and base. For masonry, cementing and plastering. Length 200 mm, weight 0.307 kg.

Read more less

Soudaband Acryl 300 is a pre-compressed foam with a width of 15 mm and a thickness of 3 mm to 12 mm, intended for sealing against noise, air, dust and rain. Roll of 10 m. Tested waterproofness against driving rain up to 300Pa. B2 fire rating for connection and expansion joints in masonry, prefabricated elements, concrete, roof constructions, etc. Sealing of (connection) joints around windows and doors. Sealing between metal components. High thermal and acoustic insulation between coupled windows. Joint backing for sealants.

Read more less

Dhome construction site projector very robust, waterproof equipped with a socket for connecting a portable electrical appliance perfect for DIY or professional use. 30 w, 3200LM Rear socket 16A (220 - 240 V, Max 3000 W) Tiltable lighting up to 90° Ultra light, long cable length (5 m) to move the projector easily. IP54 waterproof rating High impact resistance = IK08 Tilting foot to direct the lighting

Read more less

The Fischer plastic injection sieve is a system element for the use of Fischer chemical grouting (539241) in hollow masonry. The sieve is inserted into the borehole and filled with resin from the bottom. When the threaded rod or threaded sleeve is inserted, the resin is compressed through the mesh structure of the sieve and creates a form lock in the hollow brick. The load is thus transferred to the building material. With the injection sieve, non-load-bearing layers can also be penetrated. Dimensions 16x85 mm. Sold individually.

Read more less

The Fischer plastic injection sieve is a system element for the use of Fischer chemical grouting (539241) in hollow masonry. The sieve is inserted into the borehole and filled with resin from the bottom. When the threaded rod or tapped sleeve is inserted, the resin is compressed through the mesh structure of the sieve and creates a form lock in the hollow brick. The load is thus transferred to the building material. With the injection sieve, non-load-bearing layers can also be penetrated. Dimensions 16x130 mm. Sold individually.

Read more less

This reinforced Taliaplast Taliagom bucket has multiple functions thanks to its flat edge: easy handling of materials with a trowel, easy placement against a wall, a ladder, etc. Reinforced with synthetic rubber (EPDM), it is lightweight and very shock-resistant. The flat side allows for many uses, it reduces discomfort and effort when moving (arms remain close to the body) allows you to scrape the floor. 2 holes on each side of the flat edge are provided for adding fixing hooks. Ideal for emptying precisely using an angle as a pouring spout. Comfort handle for a more comfortable grip. Light wire handle Ø 5.3 mm. Reinforced and ribbed base: resistance and comfortable grip. Side stops to keep the handle in a vertical position. This handle is articulated around 2 holes located on the ears of the bucket and remains in a vertical position thanks to 2 side stop lugs located on either side. This position can be easily cancelled by simple pressure. This feature provides real comfort during repeated handling. It prevents inappropriate movements that can, in the long term, cause disadvantageous lower back pain. 13 liters.

Read more less