Tools of the mason, the carpenter.
-
SOUDAL Soudal PU foam SOUDAFOAM
Soudal Soudafoam Universal M (Manual) expanding foam is a single-component, self-expanding polyurethane foam for upside-down use. The foam contains gases (HCFC and CFC free), which do not attack the ozone layer. 500 ml can. Excellent adhesion to all substrates, except PE/PP/PTFE. High filling yield. Very good thermal and acoustic insulation. Shake the aerosol vigorously for 20 seconds. Screw the nozzle onto the aerosol. Moisten the dust- and grease-free substrate. For unusual substrates, it is advisable to carry out an adhesion test. Fill the joint or cavity 1/3 full, as the foam continues to expand while it hardens. Shake regularly during use. If several coats are applied, moisten between coats. Uncured foam can be removed with cleaner or acetone. Cured foam can only be removed mechanically, or with the help of Soudal PU-remover.
€6,25 HT (€0,00 TTC)
-
Walking iron
The light and handy black plastic step iron , for rounding concrete steps, for finishing concrete thresholds.
€1,67 HT (€0,00 TTC)
-
Wilmart Wilmart Stop'n'Roll Tape Measure
STOP'N'ROLL tape measure with automatic tape locking. After removing the tape, it is no longer necessary to activate the lock, it is permanent. To insert the tape into the case, you must activate one of the 2 buttons, this prevents the tape from breaking and knocks to the fingers. Length 5 meters, width 19 mm. Belt clip, ABS case with elastomer cover for greater robustness.
€3,75 HT (€0,00 TTC)
-
TALIAPLAST Taliaplast rectangular grey shock PS trowel
Taliaplast trowel, essential in masonry, it is used to take cement or to trowel, flatten, smooth concrete. Good resistance, Honeycomb tray. Intended for professionals, Dimensions 34x23 cm.
€5,64 HT (€0,00 TTC)
-
TALIAPLAST Rectangular sponge trowel with wooden tray Taliaplast
Rectangular Taliaplast trowel with sponge for achieving different finishes of plasters, scraped, washed, sponged. Sponge sole density 35kg/m³. Ergonomic handle in polypropylene injected with nitrogen gas, interchangeable. Mounted by a double dovetail system.
€8,79 HT (€0,00 TTC)
-
TALIAPLAST Rectangular sponge trowel with plastic tray Taliaplast
Rectangular Taliaplast trowel with sponge for creating different finishes of plasters, scraped, washed, sponged. Wooden handle. Supplied with pinning clip. Dimensions 27x18 cm.
€8,05 HT (€0,00 TTC)
-
TALIAPLAST Taliaplast pointed trowel
Taliaplast trowel, essential in masonry, it is used to take cement or to trowel, flatten, smooth concrete. Good resistance, Honeycomb tray. Intended for professionals, Dimensions 27x18 cm.
€4,25 HT (€0,00 TTC)
-
TALIAPLAST Taliaplast aluminum false square
Taliaplast aluminium false square, ideal for measuring angles and reproducing them for possible cutting. Aluminium profile with plastic end cap and locking screw.
€32,58 HT (€0,00 TTC)
-
TALIAPLAST Taliaplast joint kit
Contains: a polyester canvas conical joint bag, a plastic reducer tip and 1 dose of adjuvant.
€16,25 HT (€0,00 TTC)
-
TALIAPLAST Taliaplast joint pocket
Taliaplast joint pocket ideal for filling small spaces between tiles, brick, stone, rubble, etc. Conical joint pocket in PVC canvas.
€8,33 HT (€0,00 TTC)
-
REVEX Revex cord
The Revex cord is essential in masonry in wooden frames to draw a line to align the battens of a roof, to draw a very for the assembly of rubble. Aluminum cord, length of wire 30 m Ø 1 mm.
€11,46 HT (€0,00 TTC)
-
REVEX Revex cord
The Revex cord is essential in masonry in wooden frames to draw a line to align the battens of a roof, to draw a very for the assembly of rubble. Plastic cord, length of the wire 30 m Ø 1 mm.
€13,92 HT (€0,00 TTC)
