The tools portable power tool essential for professionals or individuals to successfully complete a project. We offer you a wide choice of electric, battery-powered and thermal machines adapted to your needs such as Makita , Leman , Dolmar , Cori , Imer , Hikoki , Alsafix . You will easily find the tool best suited to your work.
Wilmart 360° 3-line green laser level ideal for all exterior and interior work: for installing partition rails, electricity, carpentry, tiling, wood framing, masonry, etc. It has a horizontal line and 2 self-leveling vertical lines with a range of 30 m. Switch lock for slopes. Autonomy: approx. 4 hours with all beams on. Waterproofing: IP54 (dust and water splashes) Dim: 87 x 111 x 113 mm 1/4" thread for attaching to photo tripod 3.7V 5200mAh Li-ion battery Laser: 510-530 nm (IEC 60825-1:2014 standard) Range approximately 30 m (> 50 m with receiver, not supplied) Pendulum self-leveling range 4° ±1° Accuracy ±3 mm / 10 m Accessories supplied: Carrying case, charger, battery, support for quick attachment to photo tripod or wall magnet, 1/4" => 5/8" adapter for topography tripods.
€200,42 HT (€0,00 TTC)
The Makita PF0300 clear water submersible pump is perfect for drawing water from a well or emptying a cellar or flooded premises. Lightweight, it is easy to handle and use and the float switches off the pump as soon as there is no more water. With a power of 300 W, it has a discharge height of 7 m. Oil bath between the motor and the turbine ensuring the motor is watertight and the pump is long-lasting. Cellar drain pump for clear water with a maximum particle size of 5 mm. 2-channel closed turbine for pumping clear water in domestic installations. Automatic pump activation based on float position. Adjustment slide to set the desired activation depth. Standard fittings to connect the pump to commercially available accessories.
€83,43 HT (€0,00 TTC)
This Makita adapter is perfect for transforming an impact driver into a wrench . Thanks to its ¼ shank, it can be mounted on all impact drivers or even on a drill with a chuck. With its 3/8 square drive, you can use 3/8 ratchet sockets. Length 50 mm.
€4,00 HT (€0,00 TTC)
Batterie de chantier IMER 5000 W : l'énergie autonome de vos chantiers La batterie de chantier IMER 5000 W est une station d'énergie portable conçue pour alimenter vos outils électroportatifs sans groupe électrogène ni raccordement au réseau. Avec ses 5040 Wh de capacité et sa technologie LiFePO4, elle couvre une journée complète de chantier (perceuse, scie circulaire, ponceuse, projecteur, bétonnière électrique) en silence et sans la moindre émission. Pourquoi choisir la batterie 5000 W ? 5000 W de puissance continue (7000 W en pic) : de quoi faire tourner des outils exigeants. 5040 Wh d'autonomie : une journée de travail pour une équipe. Silence total : utilisable en intérieur, en rénovation, en zone résidentielle. Zéro émission : compatible espaces confinés et tunnels, là où le thermique est proscrit. Recharge en 2h30 sur secteur, et compatible recharge solaire pour les sites isolés. Écran LCD + pilotage par application : suivez la charge et la consommation en temps réel. Protections intégrées : surcharge, différentiel, BMS. Caractéristiques techniques Puissance continue 5000 W Puissance de pointe 7000 W Capacité 5040 Wh Technologie LiFePO4 avec régulation Inverter Sorties 230 V + USB Temps de recharge 2h30 (compatible solaire) Protections Surcharge, différentiel, BMS, écran LCD + application Référence 2VE5000 Batterie de chantier ou groupe électrogène ? Contrairement au groupe électrogène thermique, la batterie de chantier IMER ne produit aucun bruit, aucune fumée et ne consomme pas d'essence. Elle est immédiatement opérationnelle et sans entretien moteur. Pour les chantiers urbains, en intérieur ou soumis à des contraintes sonores, c'est la solution d'alimentation de référence. Besoin d'un modèle plus compact ? Découvrez la batterie de chantier IMER 3600 W Challenger, ou comparez les deux modèles sur notre page batteries de chantier. Tarif professionnel selon vos volumes. Demandez votre devis ou appelez notre équipe technique au 04 71 08 42 11.
€2.960,00 HT (€0,00 TTC)
The Makita AC1300 compressor is a small but powerful air compressor. Among the lightest compressors on the market, it is particularly easy to handle thanks to its handle and wheels that make it easy to move. With a power of 2,100 W for a pressure of 10 bar, the AC1300 model quickly makes you forget its small size when using it. This oil-free compressor, in addition to its power, also ensures very decent autonomy with its secure 20 l tank. With the Makita AC1300 compressor , you have a compact and handy air compressor that will amaze you with its power.
€177,00 HT (€0,00 TTC)
Le Makita DC18RC est un chargeur rapide performant et polyvalent, conçu pour recharger efficacement vos batteries Li-Ion type glissière de 14,4V à 18V (sauf BL1413G et BL1813G). Peut charger les batteries Ni-Mh : 9,6V à 14,4V avec l’adaptateur 193947-6, prend en charge les batteries Ni-Cd et Ni-Mh de 7,2V à 18V (type bâton). Technologie de refroidissement actif pour une meilleure longévité des batteries. Système de contrôle intégré pour optimiser la charge et éviter la surcharge. Équivalent Dolmar LG183 – idéal pour les professionnels et les bricoleurs exigeants.
€93,42 HT (€0,00 TTC)
Salki stapler-nailer very robust thanks to its metal casing, it is perfect for professional use. Stapling power adjustment, ergonomic handle with integrated closing device + hook. Supplied with 8 mm staples. Staples type 140.
€13,42 HT (€0,00 TTC)
Salki stapler-nailer very robust thanks to its metal casing, it is perfect for professional use. Stapling power adjustment, ergonomic handle with integrated closing device + hook. Supplied with 8 mm staples. Staples type 140.
€29,16 HT (€0,00 TTC)
Wilmart lightweight aluminum tripod , ideal for scopes and laser levels, tubular section structure with quick release. Flat head with 5/8" thread, 126mm diameter. Height 107 to 171 cm.
€85,83 HT (€0,00 TTC)
Wilmart laser distance meter with multi-directional FSTN LCD display and backlight, perfect for measurements up to 40m with an accuracy of ±2mm, it can calculate areas, volumes and triangles. Dimensions: 112 x 50 x 25 mm Capacity: 0.05 to 60m Laser: 635nm<1mW Automatic laser shutdown: 20 s Unit: mm/in/ft Measurement function: continuous/surface/volume/triangle Function: addition/subtraction/volume/Pythagoras/Mas+min Memory: 100 measurements Automatic shutdown: 150s Storage temperature: -20°C to 60°C Operating temperature: 0°C to -40°C Storage humidity: RH 85% Batteries: 1.5V 2 AAA
€45,54 HT (€0,00 TTC)
This table saw with scoring saw and flush table carriage is the top of the range from Leman. It is designed for cutting boards, rafters, beams but also hardwood, melamine, large chipboard. Frame and engine housing cladding in welded mechanics. Sawing table and right extension in cast steel + second right extension and output in welded mechanics. 4 HP (3000w) single-phase motor, maintenance-free, durable and silent. Aluminum saw carriage flush with blade with sliding on steel balls. Aluminum rip fence with micrometric adjustment, and ergonomic clamping handles. Edging stop for cutting wood or panels. Large carriage table with graduated ruler and stop extendable to 2250mm. Cleaning hatch on the engine housing cladding, allowing the evacuation of sawdust and annoying wood scraps. Blade adjustable in height and tiltable up to 45° to the right. Adjustment by two independent cranks. Reinforcement stand allowing better stability of the machine when machining large dimensions on the cutting carriage. Suction outlet on the Ø30mm blade cover, connected to the collector by a flexible hose (supplied). The machine is supplied with the rip fence, the ripping stop, a Ø 315 carbide blade with 40 teeth, an extendable scoring blade D.100mm with 2x12 teeth, the table extensions, the presser, the miter guide, the pusher, keys and user instructions.
€3.553,00 HT (€0,00 TTC)
With this Leman table saw with carriage you can saw and edge any type of wood, such as boards, rafters, beams with great precision. Frame and engine housing cladding in welded mechanics. Cast steel saw table with welded right and outlet extension. Single-phase motor with a power of 2100 W, durable and silent. Aluminum saw carriage flush with blade with sliding on steel balls. Aluminum rip fence with micrometric adjustment, and knurled clamping handles. Edging stop for cutting wood or panels. Large carriage table with graduated ruler and stop extendable to 2280 mm. Cleaning hatch on the engine housing cladding, allowing the evacuation of sawdust and annoying wood scraps. Blade adjustable in height and tiltable up to 45 ° to the right. Adjustment by two independent cranks. Frame reinforcement stand allowing better stability of the machine when machining large dimensions on the cutting carriage. Suction outlet on the blade cover Ø 30 mm, connected to the collector by a flexible hose (supplied). The machine is supplied with the rip fence, the side carriage, the ripping stop, a 36-tooth carbide blade, the table extensions, the pusher, keys and operating instructions.
€2.041,00 HT (€0,00 TTC)
