Construction equipment

Perfect for vibrating concrete, this IMER AVPI / SQ needle allows better filling of formwork, better finishing of works. Ø 25 mm length 2 M. Very robust vibrating needle with reinforced transmission, flexible reinforced with steel mesh, 4 sealed bearings for greater reliability. Centrifugal force 55 kg, max output 10 m3/h, max vibration 13000 rpm, bottle length 340 mm, Ø 25 mm. Fits on MVPI / SQ engine. For any delivery to Corsica , contact us for a quote.

Read more less

Perfect for vibrating concrete, this IMER AVPI / SQ needle allows better filling of formwork, better finishing of works. Ø 25 mm length 1.5 M. Very robust vibrating needle with reinforced transmission, flexible reinforced with steel mesh, 4 sealed bearings for greater reliability. Centrifugal force 55 kg, max output 10 m3/h, max vibration 13000 rpm, bottle length 340 mm, Ø 25 mm. Fits on MVPI / SQ engine. For any delivery to Corsica , contact us for a quote.

Read more less

The Imer EVPI/SQ portable set includes a needle + the motor, ideal for vibrating all masonry formwork, pillars, slabs, low walls, swimming pools, very handy and light, it is very popular with masons. Needle Ø 25 length 1 meter. MVPI/SQ single-phase motor with a power of 2300 W (2.9 hp) with double insulation, very robust plastic casing. Very robust vibrating needle with reinforced transmission, flexible reinforced with steel mesh, 4 sealed bearings for greater reliability. Centrifugal force 55 kg, max output 10 m3/h, max vibration 13000 rpm, bottle length 340 mm, Ø 25 mm. For any delivery to Corsica , contact us for a quote.

Read more less

Perfect for vibrating concrete, this IMER AVPI / SQ needle allows better filling of formwork, better finishing of works. Ø 25 mm length 1 M. Very robust vibrating needle with reinforced transmission, flexible reinforced with steel mesh, 4 sealed bearings for greater reliability. Centrifugal force 55 kg, max output 10 m3/h, max vibration 13000 rpm, bottle length 340 mm, Ø 25 mm. Fits on MVPI / SQ engine. For any delivery to Corsica , contact us for a quote.

Read more less

The Imer MIX 750 mixer is perfect for very high production of mortar thanks to forced mixing and the powerful electric or thermal motor, which allows a rapid work cycle, 3 to 4 minutes to mix 480 liters in optimal conditions. Available in 2 versions, 380V three-phase electric motor with 5.5 HP power or Honda GXV340 petrol engine with 10.9 HP power. Electrical safety device that cuts the rotation of the blades if the mixing tank is opened. Magnetothermal switch with minimum voltage coil IP 55 and IP 67 socket (version with electric motor). Grid with bag-piercing blade: the grid allows great visibility to control the mixing and the grid protects against accidental contact. Mixing blades with rotating satellite. Pneumatic wheels and tension bar for excellent mobility on construction sites. Granulometry 5 – 6 mm. Towable at 25 KM/H . For any delivery to Corsica , contact us for a quote.

Read more less

The Imer MIX 360R mixer is perfect for high production of mortar thanks to forced mixing and the powerful electric or thermal motorization which allows a fast work cycle, 35 seconds to mix 200 liters in optimal conditions. Available in 2 versions, 380V three-phase electric motor with 4 HP power or Honda GXV340 petrol engine with 8.8 HP power. Electrical safety device that cuts the rotation of the blades if the mixing tank is opened. Magnetothermal switch with IP 55 minimum voltage coil and IP 67 socket (version with electric motor). Grid with bag-piercing blade: the grid provides great visibility to monitor the mixing and the grid protects against accidental contact. Mixing blades with rotating satellite. Pneumatic wheels and tension bar for excellent mobility on construction sites. Grain size 5 – 6 mm. Towable at 90 KM/H, supplied with fire plate. For any delivery to Corsica , contact us for a quote.

Read more less

The Imer MIX 120 + mixer is remarkable for mixing materials such as traditional mortars, pre-mixed products with a particle size not exceeding 8 MM. It is also equipped with a double direction of rotation of the blades which allows a fast and homogeneous mixing with a maximum discharge height of 665 mm. The oil bath reducer transmission system is highly reliable and easy to maintain. Thanks to its powerful 230 V single-phase motor, you can use it on any construction site. It is equipped with an electrical safety device that stops the motor when the motor unit is opened. Mixing 80 litres of lean screed takes only about 40 seconds. Effective output 90 litres. For any delivery to Corsica , contact us for a quote.

Read more less

The Imer Mix-ALL mixer is ideal for mixing self-leveling liquid products, fiber-reinforced materials and concrete repair materials thanks to its new double planetary mixing system. This double mixing gives a perfect homogeneous mixture without trapped air. Equipped with a 220 V single-phase motor and an oil bath reducer, it ensures great reliability. Supplied with 2 wear-resistant technopolymer tanks with a capacity of 56 l with an effective yield of 47 l. For any delivery to Corsica , contact us for a quote.

Read more less

This Imer BHV401S construction site submersible pump is equipped with a vortex effect turbine which prevents clogging by creating a whirlpool in the pump body, thus allowing materials to be evacuated with the liquid without them coming into contact with the hydraulic parts. Very robust, it is designed for very dirty water. Discharge Connection Ø: 50 mm Maximum flow rate: 250 L/min (15 m3/h) HMT (Total Manometric Height): 11 m Granulometry (Ø strainer hole): 25 mm Motor Type: Electric 230 V, power consumption: 650 W Engine speed 2950 rpm Electric cord length (m): 10 Net Dry Weight: 10 KG For any delivery to Corsica , contact us for a quote.

Read more less

This Imer PX-50 submersible pump is perfect for draining water from a cellar or on a construction site, works up to 20 mm of water height . Compact, lightweight and robust, it ensures safe use, for professionals or individuals looking for reliable and high-performance equipment. Discharge Connection Ø (mm): 50 Maximum flow rate: 15.6 m3/h (260 L/min) HMT (Total Manometric Height): 10 Granulometry (Ø strainer hole): 6 mm Motor Type: Electric 230 V ~ / 50 Hz, power consumption 620 W Engine speed (rpm): 2900 Electric cord length (m): 10 Net Dry Weight: 12 kg Standard Accessories Supplied: 5 m long rope, screw connector and collar For any delivery to Corsica , contact us for a quote.

Read more less

This Imer PLX-25 submersible pump is perfect for draining water from a cellar or on a construction site, it leaves only 1mm of water . Compact, lightweight and robust, it ensures safe use, for professionals or individuals looking for reliable and efficient equipment. Discharge Connection Ø (mm): 25 Maximum flow rate: 7.2 m3/h (120 L/min) HMT (Total Manometric Height): 10 Granulometry (Ø strainer hole) (mm): 1 Motor Type: Electric 230 V ~ / 50 Hz, power consumption 540 W Engine speed (rpm): 2900 Electric cord length (m): 10 Dimensions Ø x H (mm): 190 x 320 Net Dry Weight (kg): 11.5 Standard Accessories Supplied: 5 m long rope, screw connector and collar For any delivery to Corsica , contact us for a quote.

Read more less

The Leman losst315 construction site table saw is ideal for cutting boards, formwork panels, rafters, pallets, laminated panels, etc. Equipped with a powerful 2200 W motor, it easily cuts hard or soft woods up to a maximum height of 90 mm. It is easy to maneuver thanks to the movement kit. With a large table 550 x 800 mm, the Leman table saw is perfect for all wood cutting on construction sites or in the workshop. The machine is supplied with the rip fence, the miter fence, 1 carbide blade with 24 teeth, the side carriage, the welded rear table extension, the moving kit, keys and instructions for use. Blade diameter 315 mm, bore 30, 24 teeth.

Read more less